Dealer Login

Solid-State Bilge Pump Switch with Oil / Fuel Alarm Sensor (BG-ONE)

The BG-One Smart bilge pump switch technology precisely detects oil and fuel with accuracy down to 1mm (0.04 in). The solid-state BG-ONE bilge pump switch and alarm sensor enables boat operators to control their bilge pumps and mitigate overboard discharge of oil or fuel. BG-ONE differentiates between water, oil/fuel, and air and will trigger an alarm if either fuel or oil is detected in the bilge.

Three operation modes enable boaters to operate safely in any environment:

  • Marina Mode (factory default) – Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will turn back ON when only water is detected.

  • Marine Sanctuary Mode – Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will remain OFF until the alarm and bilge is cleared (requires power cycling device).

  • High Seas Mode – Pump will turn ON when any liquid is detected and turn OFF when there is no liquid detected.

For boaters who are tired of frequently replacing faulty float switches, BG-ONE operates with two integrated sensors and no moving parts. For boaters worried about current regulations and fines associated with oil spills, please refer to the AMSA Marine order 91—Marine pollution prevention—oil  & AMSA Discharge Standards. BG-ONE minimises boat owners’ and operators’ liability for costly cleanup and pollution fines through selective pumping. Click here to learn about how BGI’s solid-state bilge pump switch extends the life and reliability of your bilge pump. If you’re in the market for an environmentally bilge pump switch, BG-ONE’s oil and fuel detection technology is right for you.

  • IP-68 Rated Durability
    Rugged, non-corrosive ABS plastic housing and mounting bracket

  • Integrated Bluetooth Connectivity
    Connects to the BGI Config App available on Google Play and the App Store

Pump power is controlled by the BG-ONE. The BG-ONE is CE and ISO 8846 Marine Ignition Protection Certified, tested to ABYC-1500 standards. Two integrated sensors will turn the bilge pump ON when water or any liquid is detected and turn OFF when no water or liquid is detected.

With no moving parts, the BG-ONE is a dependable alternative to mechanical float switches. Wireless Bluetooth connectivity enables users to adjust pump run time, test, and view its status via BGI Config App. Built-in splash protection to prevent false activation in rough waters – adjustable and can be disabled.

The BG-ONE can be tested and its status can be viewed using the BGI Config App, which can be downloaded from the App Store or Google Play. The App is used on a mobile device with Bluetooth to wirelessly connect to the BG-ONE device. The App will report the input voltage level and system temperature. It also allows changing the name of the device for easy identification and testing the device.

Each BG-ONE comes with a mounting bracket that attaches horizontally or vertically to the bulkhead or hull with #8×0.75” 316 stainless steel screws. Connects to any 12, 24, or 32 Vdc bilge pump and alarm panel on the market today.

 

See quick specs below:

  • Five Wire System
    14 AWG marine-grade wires, 6 feet long
  • Operating Voltage
    12, 24, or 32 Vdc
  • Max current
    20 Amps
  • Alarm Output
    1 amp max
  • Compact Size
    4.6 in x 2.0 in (without mounting bracket)
  • IP-68 Rated Durability
    Rugged, non-corrosive ABS plastic housing and mounting bracket
  • Integrated Bluetooth Connectivity
    Connects to the BGI Config App available on Google Play and the App Store

 

Technical Data Sheet

Installation Manual

User Manual

 



Enquire Now